Original Launch X431 V+ 5.0 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer

Model: SP184+SK368
SKU: SP184+SK368
In Stock
$1,799.00 Original price was: $1,799.00.$1,599.00Current price is: $1,599.00.
In Stock
Other people want this. 147 people have this in their carts right now.

Description

Launch X431 V+ 5.0 10.01 Inch X431 X431V PLUS Wifi/Bluetooth Full System Diagnostic Tool (Updated Version of V+ 4.0) with GIII X-PROG3 Immobilizer Programmerr

Launch X431 V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application. You can use X431 V+ to diagnose full car model and full system fault through Bluetoooth. X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 V+, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

launch x431 v+ v pro 4.0 scanner bidirectional diagnostic tool

Highlights:

1. Global Version, No IP Limitation
2. Package Contains Full Set Launch X431 V+ and Launch GIII X-PROG3
3. Vehicle Coverage: Supports about 80 car brands from USA, European, Asian and so on.
4. Supports More Advanced Functions, including Actuation Test and Guiding Functions (compatible with VW, AUDI, SKODA, SEAT).
5. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
6. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
7. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
8. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
9. Free Update Online for 2 Years

 

What Updates have we made in 2024 as the Elite UPGRADED Version OF LAUNCH X431 V+ 4.0 scan tool?
  1. The Newly Added Functions on Passenger Car Software of LAUNCH X431 V+: 1. GPF Regeneration; 2. High Voltage Battery Health Test; 3. Transport Mode; 4. Intelligent Cruise control; 5. Engine Power Balance Monitoring; 6. Stop Start (Available after selecting a system, always keep growing).
  2. Variant Coding (Offline Programming): is programming ECUs to meet vehicle variants, such as left-hand drive or right-hand drive. Variant coding includes the enabling and disabling of software-driven functions.
  3. Compatible with Heavy Truck Moduleyou can purchase an additional heavy-duty truck diagnostic module (a Bluetooth adaptor that works with LAUNCH X431 V+ to diagnose all systems on trucks.
  4. LAUNCH X431 V+ 4.0 car automotive scanner supports more advanced functions, including Bi-directional Control, Actuation Test, and Guiding Functions (compatible with VW, AUDI, SKODA, SEAT).
  5. The guide function of LAUNCH X431 V+ 4.0 is freebut other scanners need to be used for a fee.
  6. AutoAuth for FCA, SGW.
  7. Optimized HIGH-END Hardware Configurations: 32GB storage capacity + 128GB extended memory + Fixed battery life issue of 2019 year + Faster update frequency + More vehicle coverage (up to 2018/2019/2020/2021, including cars, SUVs, minivans, 12v light-duty trucks) + Available to Download any applications + OBD1 & OBD2 diagnosis
  8. ECU REPLACEMENT: When an ECU/module is damaged, you have to replace it with a new one. After replacing the ECU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car cannot start or some parts cannot work normally. Featuring ECU/Module replacement functions, LAUNCH X431 V+ 4.0 can help you initialize, match,relearn, or code the newly replaced ECU/module to get it back on track.
  9. Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

New Added OE-LEVEL Advanced Functions of LAUNCH X431 V+ 

Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.
Programmable Module Installation: Compatible with Ford / Mazda etc.
Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.√ Actuator Test : Injector Test ;Turn Off ACC Lane Keeping Assist

* For BENZ
Optimized ADAS (Advanced Driving Assistance System) function for SSLink products.
Optimized the function of Query VIN for police equipment.
Updated DPF function(Regeneration of the diesel particulate filter while driving) of diesel engine (CRR1, CRD2, CR43, CR6, CR6EU5, CR6BIN5EU6) under 117, 212, 207, 204 and more chassis.

* For LANDROVER
Added the special function of Camera Calibration for Land Rover models in the year range of 2010 to 2014
Added special functions related with ADAS (Advanced Driving Assistance System) for all models of Jaguar and Land Rover in the year range of 2017 to 2020.

* For SPRINTER
Added actuation test and special functions for the headlight range regulation module, reversing camera, and 360 degree panoramic camera under chassis 470/471.
Added the data stream and actuation test functions for the systems such as engine, gearbox, gearshift module, fuel pump, drive system, A/C, signal acquisition and actuation control module, and FL door under chassis 907/910.

What Can X431 GIII X-Prog 3 Do For You?

1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

Package List:

1pc x X-431 V+ v4.0 table
1pc x QUICK START GUIDE
1pc x USER MANUAL
1pc x PIN envelope
1pc x Storage Case
1pc x CLIPPER
1pc x FUSE
1pc x BT ADAPTER (DBScar-4/DS301)
1pc x SWITCHING ADAPTER
1pc x OBD 1 Adapter BOX
1pc x AIT I OBD16 Extension Cable
1pc x X-431 PRO5 USB A to Micro cable
1pc x Cigarette Lighter Line
1pc x Power Cable with Double Clamp
24 special connectors for diagnosing different cars directly: AUDI-4, BENZ-14, BENZ-38, BMW-20, CHRYSLER-6, DAEWOO-12, DAIHATSU-4, FIAT-3, FORD-6+1, GAZ, GEELY-22, HONDA-3, KIA-20, MAZDA-17, MITSUBISHI/HYUNDAI-12+16, NISSAN-14+16, SSANGYONG-14, SSANGYONG-20, SUBARU-9, SUZUKI-3, TOYOTA-17, TOYOTA-22, UNIVERSAL-3, GM/VAZ-12;

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual

 

Additional information

Weight 17.5 kg

Reviews

There are no reviews yet.

Be the first to review “Original Launch X431 V+ 5.0 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer”

Your email address will not be published. Required fields are marked *

Log in

You dont have an account yet? Register Now